Casselin CFRPCD40 Mode D'emploi page 69

CYCLE STARTED screen
Once the program has started, the START button changes to STOP and
turns blue to signal the start of the cycle.
By clicking on the icon at the bottom right, you can quickly choose ECO
mode (leaf icon), with the resistors operating at 25
%, BOOST mode (arrow icon), with the resistors operatingto 100%, or
cancel the above modes by clicking the icon again.
A series of animated arrows appear below the timer, indicating the
moving band.
Progressive screen CYCLE STARTED
After approximately ten seconds of starting the cycle, the screen
displays the current chamber temperature under the THERMOMETER
icon. As an infinite time cycle, the cooking of the product being
determined by the exit from the cooking chamber, the time is not
displayed.
If the oven is still preheating, a bar indicating progress towards the
desired temperature is displayed.
The temperature value is colored orange if the heating elements
concerned are heating, white if the oven has reached the selected
temperature.
20