Télécharger Imprimer la page

SilverCrest SPWD 180 I1 Mode D'emploi Et Consignes De Sécurité page 33

Masquer les pouces Voir aussi pour SPWD 180 I1:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 38
9.3 "USEL" is indicated on the display and the scales switch off
An error has occurred and the diagnostic scales cannot perform the measurement. If this
happens, step off the tread (5) on the diagnostic scales and restart the measurement.
9.4 "Err" is indicated on the display
Your weight exceeds the maximum load capacity of 180 kg / 396 lb / 28 st. You should step
off the tread (5) of the diagnostic scales immediately to avoid damaging the scales.
9.5 "Err2" is indicated on the display
An error occurred during measurement. If this happens, step off the tread (5) on the diagnostic
scales and restart the measurement. Make sure that you are standing on the electrodes (6).
10. Maintenance/cleaning
Repairs are required if the diagnostic scales have been damaged in any way, for example if the
device housing is damaged, when liquids or objects have penetrated into the diagnostic scales or
when the product has been exposed to rain or moisture. Repairs are also necessary if the product
does not perform normally or if it has been dropped. If smoke, unusual noises or smells are noticed,
remove the batteries from the diagnostic scales immediately. If this occurs, the diagnostic scales
should not be used before they have been inspected by authorised service personnel. All servicing
work must be carried out by qualified specialist personnel. Never open the diagnostic scales housing.
Only use a clean, dry cloth for cleaning the device. Never use any corrosive liquids.
11. Environmental regulations and disposal information
Devices marked with this symbol are subject to the European Directive
2012/19/EU. All electrical and electronic devices must be disposed of separately
from household waste at official disposal centres. Avoid damage to the
environment and risks to your personal health by disposing of the device properly.
For further information about proper disposal, contact your local government,
disposal bodies or the shop where you bought the device.
The symbol of the crossed-out wheelie bin on conventional and rechargeable
batteries indicates that they cannot be disposed of in normal domestic waste but
must be disposed of separately.
Where batteries contain toxic materials, the chemical symbol of the toxic material
is shown underneath the symbol, with meanings as follows:
- Pb: Battery contains lead
- Cd: Battery contains cadmium
SilverCrest SPWD 180 I1
English - 31

Publicité

loading

Ce manuel est également adapté pour:

449107 2301