Parkside PTS 710 B2 Mode D'emploi page 47

m WARNING!
Always ensure that the power plug and
u
power cord are replaced only by the
manufacturer of the product or its customer
service. This will ensure that the safety of
the product is maintained.
˜ Cleaning and care
m WARNING!
Always switch the product off, remove
the power plug from the mains power
socket and let the product cool before
performing inspection, maintenance
and cleaning work!
˜ Cleaning
Never allow fluids to get into the product.
o
The product must always be kept clean, dry
o
and free from oil or grease. Remove debris
from it after each use and before storage.
Regular and proper cleaning will help ensure
o
safe use and prolong the life of the product.
Clean the product with a dry cloth. Use a soft
o
brush for areas that are hard to reach.
NOTE
Do not use chemical, alkaline, abrasive or
u
other aggressive detergents or disinfectants
to clean this product as they might be
harmful to its surfaces.
˜ Maintenance
The product is maintenance-free.
Before and after each use, check the product
o
and accessories (e.g. saw blades) for wear
and damage. If required, exchange them
for new ones as described in this instruction
manual.
Observe the technical requirements
(see "Technical data").
46 GB/IE
Check covers and safety devices for damages
o
and correct installation. Replace as necessary.
Replace a blunt or bent saw blade or one
o
which has been damaged in some other way.
˜ Repair
This product does not contain any parts
o
that can be repaired by the user. Contact
an authorised service centre or a similarly
qualified person to have it checked and
repaired.
˜ Storage
Clean the product (see "Cleaning").
o
Store the product and its accessories in a
o
dark, dry, frost-free, well-ventilated place.
Always store the product in a place that is
o
inaccessible to children.
Store the product in its carrying case.
o
˜ Transportation
Transport the product in its carrying case.
o
Protect the product from any heavy impact
o
or strong vibrations which may occur during
transportation in vehicles.
Secure the product to prevent it from slipping
o
or falling over.
˜ Disposal
The packaging is made entirely of recyclable
materials, which you may dispose of at local
recycling facilities.
Observe the marking of the packaging
materials for waste separation, which
are marked with abbreviations (a)
and numbers (b) with following
meaning: 1–7: plastics/20–22: paper
and fibreboard/80–98: composite
materials.