Parkside PTS 710 B2 Mode D'emploi page 45

˜ Switching on and off
Switching on
1. Activate the safety lock-out
that position.
2. Press the on/off switch
is running, release the safety lock-out.
Switching off
Release the on/off switch
o
m CAUTION! RISK OF INJURY!
Always wear protective gloves when
handling or working with the product.
m CAUTION! RISK OF INJURY AND
DAMAGE TO PROPERTY!
Wear gloves when handling the saw blade.
u
In this way, you avoid injury from cuts.
Do not use any blunt or bent blades or
u
blades which are damaged in any other
way.
Before sawing the workpiece, check for
u
hidden foreign objects such as nails,
screws. These must be removed.
Always insert a suitable saw blade.
u
Secure the workpiece with the aid of
u
clamping devices on the workbench.
Apply only as much pressure as is required
u
for sawing. If there is excessive pressure,
the sawing blade may bend and break.
Switch the product off immediately if the
u
sawing blade jams.
Spread the saw cut out and pull the blade
out carefully.
Always stand to the side of the product
u
when working.
Always make sure that the workplace is
u
well ventilated.
Avoid over-stressing the product while
u
working.
44 GB/IE
and keep it in
[ 2 ]
. Once the product
3 ] [
.
3 ] [
˜ Selecting the cutting depth
NOTE
We generally recommend setting the
u
cutting depth to approx. 2 mm more than
the thickness of the material. This ensures
that you achieve a clean cut.
1. Let go of the quick-release lever of the cutting
depth pre-selector
2. Set the desired cutting depth on the scale
3. Clamp the quick-release lever tight again.
˜ Fitting the rip fence
1. Loosen the screw for the rip fence
base plate .
[ 7 ]
2. Insert the rip fence
slot .
[ ]
3. Retighten the screw for the rip fence.
˜ Handling the circular saw
1. Place the product on the material. If
necessary, align the product with the rip
fence or on a marked line.
[ ]
2. Activate the safety lock-out
that position. Press the on/off switch
3. Press the product forward to lower the circular
saw. You can now release the safety lock-out.
4. Saw by applying moderate pressure.
˜ Types of saw blades
The types of saw blades supplied cover the most
common fields of application.
Type/Description
HSS circular saw blade
24 Z89/60
Ø 89 mm
60 teeth
HSS circular saw blade
25 Z89/80
Ø 89 mm
80 teeth
.
9 ] [
on the
[ ]
into the rip fence
[ ]
and keep it in
2 ] [
.
3 ] [
Application
Softwood
o
Soft metals
o
Softwood
o
Soft metals
o
.
8 ] [