PLAYTIVE 435256 2304 Notice D'utilisation page 36

Note
The ring poles (9) and the connectors (8) must slide into each other easily and must not jam.
4. Repeat this step seven times.
5. Guide the ring poles (9) through the top openings in the safety net (10) with the connectors (8) leading.
WARNING!
Always guide a ring pole (9) through the openings of the safety net (10) with the connector (8) leading. Otherwise
the sharp-edged ends of the ring pole (9) may damage the safety net (10).
Note
Each opening of the safety net (10) must contain a ring pole (9) with connector (8) and the end of the next ring
pole (9).
6. Connect the ring poles (9) by inserting the free end of the next ring pole (9) into the connector (8).
7. Firmly screw the end of the ring pole (9) into the connector (8) with a small screw (14) and a small nut (19). Use
the hex key/screwdriver (20) and the tool (21).
Note
Two adults should perform the next step of fastening the net poles (3) to the frame and the feet.
Note
The net pole (3) must arch outwards.
8. Hold two spacers (16) on each drill hole of the leg sleeve (1a) and the foot.
Note
The spacers (16) have two different sides for a large and a small pipe diameter. The more pronounced arch (smaller
diameter) must be pointing towards you.
9. Place the net pole (3) with its drill holes in front of the spacers (16) and insert one large screw (15) through each
drill hole in the leg sleeve (1a) and the foot.
10. Place a washer (17) on the end of the large screw (15) and tighten the large nut (18) with the tool (21) and the
hex key/screwdriver (20).
11. Repeat the previous steps seven times.
12. Place the ring poles (9) on the net poles with holder (4).
13. With two people standing opposite one another, lift the safety net (10) on the net poles with holder (4) and
place the end of the net poles with holder (4) onto the ends of the net poles (3).
36 GB/IE