Technical Data; Noise/Vibration Information - Bosch GCM 12 SDE Professional Notice Originale

160992A3UL_201801.book Page 33 Wednesday, January 10, 2018 1:52 PM
38 Locking screw of the adjustable fence
39 Hex key (6 mm/4 mm)
40 Material clamp
41 Adjusting screw of depth stop
42 Depth stop
43 Spindle lock
44 Left bevel angle indicator
45 Stop for 0° standard bevel angle
46 Chip deflector
47 Hex socket screw for mounting of saw blade
48 Clamping flange
49 Saw blade
50 Interior clamping flange
51 Threaded rod
52 Wing bolt
53 Exit opening for laser beam
54 Screws for insert plate

Technical Data

Sliding Mitre Saw
Article number
Rated power input
No-load speed
Reduced starting current
Laser type
Laser class
Divergence of laser line
Weight according to EPTA-
Procedure 01:2014
Protection class
Dimension of suitable saw blades
Saw blade diameter
Blade body thickness
Max. cutting width
Mounting hole diameter
Permissible workpiece dimensions (maximum/minimum) see page 37.
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.

Noise/Vibration Information

Sound emission values determined according to
EN 62841-3-9.
Typically the A-weighted noise levels of the product are:
Sound pressure level 92 dB(A); Sound power level
105 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
The noise emission value given in these instructions has been
measured in accordance with a standardised measuring pro-
cedure and may be used to compare power tools. It may also
be used for a preliminary estimation of noise emissions.
Bosch Power Tools
55 Material stop
56 Lock screw of the material stop
57 Clamping screw of the material stop
58 Adjustment screw for laser position (flush levelling)
59 Hex key (2,5 mm)
60 Screws for laser protection cap
61 Fastening screw for laser mounting plate
62 Fastening screw for laser housing
63 Stop screw for 0° bevel angle
64 Stop screw for left-hand bevel angle range
65 Stop screw for right-hand bevel angle range
66 Set screws of scale 28 for mitre angles
67 Screw for mitre angle indicator
68 Velcro strap
Accessories shown or described are not part of the standard deliv-
ery scope of the product. A complete overview of accessories can
be found in our accessories program.
3 601 M23 1..
W
-1
min 3300–4300
nm
mW
mrad (full angle)
kg
mm
mm 1.7–2.6
mm
mm
The noise emission value given represents the main applica-
tions of the power tool. However, if the power tool is used for
other applications, with different accessories or is poorly
maintained, the noise emission value may differ. This may sig-
nificantly increase noise emissions over the total working pe-
riod.
To estimate noise emissions accurately, the times when the
tool is switched off, or when it is running but not actually being
used, should also be taken into account. This may significant-
ly reduce noise emissions over the total working period.
3 601 M23 14.
3 601 M23 1B.
1800 1800
3300–4300
 
650 650
< 1 < 1
1 1
1.0 1.0
28.4 28.4
/II /II
305 305
1.7–2.6
3.0 3.0
30 25.4
1 609 92A 3UL | (10.1.18)
English | 33
GCM 12 SDE
3 601 M23 16.
1450
4000
–
650
< 1
1
1.0
28.4
/II
305
1.7–2.6
3.0
30