Maintenance And Service - Bosch GCM 12 SDE Professional Notice Originale

160992A3UL_201801.book Page 40 Wednesday, January 10, 2018 1:52 PM
40 | English
Checking: (see figure X1)
– Adjust an angle gauge to 90° and position it between the
fence 1 and the saw blade 49 on the saw table 19.
The leg of the angle gauge must be flush with the saw blade 49
over the complete length.
Adjusting: (see figure X2)
– Loosen all four set screws 66 with the hex key (4 mm) 39
and turn the saw table 19 together with the scale 28 until
the leg of the angle gauge is flush with the saw blade over
the complete length.
– Retighten the screws again.
When the angle indicator 26 is not in line with the 0° mark of
scale 28 after adjusting, loosen screw 67 with a cross-head
screwdriver and align the angle indicator alongside the
0° mark.
Transport (see figure Y)
Before transporting the power tool, the following steps must
be carried out:
– Loosen the locking screw 6 if tightened. Pull the tool arm
completely to the front and tighten the locking screw
again.
– Make sure that the depth stop 42 is swung completely
backward and that the adjusting screw 41 fits through the
recess without touching the depth stop when moving the
tool arm.
– Bring the machine into the transport position.
– Remove all accessories that cannot be mounted firmly to
the power tool.
If possible, place unused saw blades in an enclosed con-
tainer for transport.
– Wind up the mains cable and tie it together with Velcro
strap 68.
– Carry the machine by the transport handle 11 or hold it by
the recessed handles 30 on the sides of the saw table.
 When transporting the power tool, use only the trans-
port devices and never use the protective devices.

Maintenance and Service

Maintenance and Cleaning
 Before any work on the machine itself, pull the mains
plug.
If the replacement of the supply cord is necessary, this has to
be done by Bosch or an authorized Bosch service agent in or-
der to avoid a safety hazard.
Cleaning
For safe and proper working, always keep the power tool and
its ventilation slots clean.
The retracting blade guard must always be able to move freely
and retract automatically. Therefore, always keep the area
around the retracting blade guard clean.
Remove dust and chips after each working procedure by
blowing out with compressed air or with a brush.
Clean the roller 17 regularly.
1 609 92A 3UL | (10.1.18)
Measures for Noise Reduction
Measures on behalf of the manufacturer:
– Soft starting
– Delivery of the machine with a saw blade developed partic-
ularly for noise reduction
Measures on behalf of the user:
– Low-vibration assembly on a firm working surface
– Use of saw blades with noise-reducing functions
– Regular cleaning of saw blade and power tool
Accessories
Material clamp
Insert plates
Dust bag
Stop kit for sawing ceiling strips
Material stop
Lock screw of the material stop
Saw blades for wood and plate materials, panels and
strips/mouldings
Saw blade 305 x 30 mm, 72 teeth
Saw blades for plastic and non-ferrous metals
Saw blade 305 x 30 mm, 96 teeth
Saw blades for all types of laminate flooring
Saw blade 305 x 30 mm, 96 teeth
After-sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions
concerning our products and their accessories.
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the nameplate of
the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Article number
1 609 B02 585
1 609 B04 724
1 609 B05 010
1 600 A01 4LX
1 609 B02 365
1 609 B00 263
2 608 642 531
2 608 642 529
2 608 642 137
Bosch Power Tools