Publicité
Les langues disponibles
Les langues disponibles
GB
MT
Cleaning/
maintenance
Ask our service centre to
carry out any work that is
not described in these in-
structions. Use only original parts.
Before working on the
device, ensure that the
device is switched off.
Risk of burns and electric shock.
The following cleaning and
servicing should be done reg-
ularly. This will ensure a long
and reliable service life.
Cleaning
Do not spray the ap
pliance with water
and do not immerse
it in water. Electric shock
hazard!
Do not use cleaning agents
or solvents. You may other-
wise irreparably damage the
appliance.
• Wipe off the warm soldering
tip (3)/chisel tip (9) on the
damp sponge (2) after or
during use.
• Never scrape or file any sol-
der residues off the soldering
tip with hard objects, as this
will damage the soldering tip!
30
General maintenance
Prior to every use, check the ap-
pliance for obvious defects such
as loose, worn or damaged
parts. Replace as necessary.
Storage
• Clean the equipment before
putting it away.
• Allow the device to cool
down completely before you
store it away.
• Store the device in a dry,
frost-free and dust-protected
location out of the reach of
children.
• The storage temperature for
the rechargeable battery and
the device is between 0°C
and 45°C. Avoid extreme
cold or heat during storage
to ensure the battery output is
not adversely affected.
Waste disposal
and environmental
protection
Be environmentally friendly.
Return the tool, accessories and
packaging to a recycling centre
when you have finished with
them.
Publicité
