Parkside PLSA 20-Li C3 Traduction Des Instructions D'origine page 22

GB MT
designed for commercial use.
This equipment is not suitable
for commercial use. Commer-
cial use will invalidate the guar-
antee. Any other use that is not
explicitly approved in these in-
structions may result in damage
to the equipment and represent
a serious danger to the user.
The device is intended for use
by adults. The operator or user
is responsible for accidents or
damage to other persons or their
property.
The manufacturer is not liable
for damage which is caused
through inappropriate use or
incorrect operation.
The device is part of the X 20 V
TEAM series from Parkside and
can be operated using batteries
of the X 20 V TEAM series from
Parkside. The batteries may
only be charged using chargers
of the X 20 V TEAM series from
Parkside.
General description
Extent of the delivery
Carefully unpack the appliance
and check that it is complete.
Return the packaging to a re-
22
cycling centre when you have
finished with them.
- Cordless soldering station
(2-piece)
- Chisel tip
Soldering tip (pre-assembled)
- Solder, Ø 1.0 mm
- Solder, Ø 1.5 mm
- Sponge
- Instruction Manual
Functional description
Refer to the following descrip-
tions for a functional description
of the controls.
Overview
1 On/off switch
2 Sponge
3 Soldering tip
4 Station
5 Battery
6 Button
7 Charge level indicator
8 Release button
9 Chisel tip
10 Solder Ø 1.5 mm
11 Solder Ø 1.0 mm
12 Charger
13 Attachment
14 Bushing