Murray 465307X51A Manuel D'utilisation page 26

Maintenance
7. Remove the four screws (7) that hold the idler bracket
assembly (8) (see Figure 21).
8
8. To access the idler belt guides (9), lower the idler
bracket assembly (see Figure 22). The idler bracket
assembly can not be removed until the engine drive
belt (10) is removed from the idler pulleys (11).
Remove both idler belt guides.
10
26
7
Figure 21
11
11
9
Figure 22
9. Remove the idler bracket assembly (12)
(see Figure 23).
10. Remove the two screws (13) on the right side of
the variator assembly bracket (5) (see Figure 24).
Loosen the two screws (14) on the left side of the
variator assembly bracket.
13
5
en
12
Figure 23
14
Figure 24