Reflex Hydroflow Mode D'emploi Original page 40

Operation
8 Operation
With the Hydroflow XS, the hot water temperature is controlled via the thermostatic head.
No. Component
1 Thermostatic valve (only installed in Hydroflow XS)
3 = approx. 40 °C
4 = approx. 48 °C
5 = approx. 56 °C
The preset and recommended setting on the thermostatic head is between
3 and 4.

Note!
The operation of the mains water stations S - M - L- XL is described in the separate controller instructions.
8.1 Restarting
When recommissioning, follow the commissioning steps.
40 — English Reflex Hydroflow Mains Water Station — 20.12.2023