Reflex Hydroflow Mode D'emploi Original page 28

Description of the device
Hydroflow L-XL
No. Component
SV Safety valve
DV Air vent
PU Pump
1 Volume flow sensor with temperature probe
2 Heat exchangers
3 Controller
4 Circulation unit
(Optional accessory)
Controller
The controller contains the control panel for parameter input. This is where the information from the pump, the volume flow sensor and the temperature sensors converge.
The operating instructions for the controller are enclosed with the mains water station.
Heat exchangers
The heat exchanger separates the heating water from the buffer tank and the potable water from the pipes. The potable water is heated as required in the heat exchanger
using the counterflow principle.
Pump
The pump supplies the Hydroflow with hot heating water by pumping heating water from the buffer tank to the mains water station.
Volume flow sensor with temperature probe
The volume flow sensor records the volume flow of heated potable water. The temperature probe detects the temperature of the potable water.
Control mode
The controller is a electrical controller. The electrical controller is set via the integrated control panel.
28 — English
No.
KW
WW
PVL
PRL
Z
Reflex Hydroflow Mains Water Station — 20.12.2023
Component
Cold water
Hot water
Buffer lead
Buffer return
Circulation