Reflex Hydroflow Mode D'emploi Original page 30

Description of the device
Hydroflow L-XL
No. Component
SV Safety valve
DV Air vent
PU Pump
1 Hot water volume flow sensor with temperature sensor
2 Heat exchangers
3 Regulator
4 Hot water circulation module (option)
Regulator
The regulator contains the control panel for parameter input. This is where the information from the pump, the volume flow sensor and the temperature sensors converge.
The operating manual for the regulator is enclosed with the Hydroflow station
Heat exchangers
The heat exchanger separates the heating water of the buffer tank from the service water. Dependent on requirements, the service water is heated in a heat exchanger in
a counterflow process.
Pump
The pump takes the heating water from the buffer tank and pumps it on to the heat exchanger in the Hydroflow station.
Hot water volume flow sensor with temperature sensor
The flow sensor measures the volume flow of the hot water flowing through it. The temperature sensor measures the temperature of the hot water.
Control mode
The regulator is a electronic regulator. The electronic regulator is adjusted using the integrated control panel.
30 — English
No.
KW
WW
PVL
PRL
Z
Reflex Hydroflow Mains Water Station — 20.12.2023
Component
Cold water
Hot water
Feed from the buffer tank
Return to the buffer tank
Hot water circulation