Reflex Hydroflow Mode D'emploi Original page 24

Description of the device
3.6 Residual risks
This device has been manufactured to the current state of the art. However,
some residual risk cannot be excluded.
WARNING
Risk of fire due to open ignition sources
The device housing is made of combustible material and is heat-sensitive.
•
Avoid heat and ignition sources (flames or sparks).
WARNING
Risk of injury due to heavy weight
The devices are heavy. Consequently, there is a risk of physical injury and
accidents.
•
Use suitable lifting equipment for transportation and installation.
CAUTION
Risk of burns on hot surfaces
Hot surfaces in heating systems can cause burns to the skin.
•
Wear protective gloves.
•
Please place appropriate warning signs in the vicinity of the device.
CAUTION
Risk of injury due to pressurised liquid
If installation, removal or maintenance work is not carried out correctly, there
is a risk of burns and other injuries at the connection points, if pressurised
hot water or hot steam suddenly escapes.
•
Ensure proper installation, removal or maintenance work.
•
Ensure that the system is de-pressurised before performing installation,
removal or maintenance work at the connection points.

Note!
When installing the on-site safety valve, the operator must ensure that
there is no danger during blow-off.

Note!
Equipment parts with a safety function in respect of water-side
pressure limiting according to the Pressure Equipment Directive
2014/68/EU and temperature limiting according to the Pressure
Equipment Directive 2014/68/EU are not supplied.
The operator is responsible for on-site provision of water-side pressure
and temperature protection.
24 — English
4
4.1
The Reflex Hydroflow mains water station XS, S, M, L and XL provides hot
potable water on demand. The station does not store hot water, but heats it
using the counterflow principle via a heat exchanger that physically separates
the heating water from the buffer tank and the potable water. The spatial
separation and on-demand potable water heating ensure a high standard of
hygiene. The risk of legionella multiplication is reduced.
The system essentially consists of a heat exchanger, pump, temperature
sensors and controller. This can be thermal or electrical.
Reflex Hydroflow Mains Water Station — 20.12.2023
Description of the device
Description