Reflex Hydroflow Mode D'emploi Original page 23

1 Notes on the operating manual
This operating manual is an important aid for ensuring the safe and reliable
functioning of the device.
Reflex Winkelmann GmbH accepts no liability for any damage resulting from
failure to observe the information in this operating manual. In addition to the
requirements set out in this operating manual, national statutory regulations and
provisions in the country of installation must also be complied with (concerning
accident prevention, environment protection, safe and professional work
practices, etc.).
This operating manual describes the device with basic equipment and interfaces
for optional equipment with additional functions.

Notice!
Every person installing this equipment or performing any other work at
the equipment is required to carefully read this operating manual prior to
commencing work and to comply with its instructions. The manual is to
be provided to the product operator and must be stored near the
product for access at any time.
2 Liability and guarantee
The device has been designed using state-of-the-art technology and in
accordance with generally recognised technical safety regulations. Nevertheless,
its use can pose a risk to life and limb of personnel or third persons as well as
cause damage to the system or other property.
It is not permitted to make any modifications at the device, such as to the
hydraulic system or the circuitry.
Warranty and liability claims will not be accepted by the manufacturer if these
can be traced back to one or more of the following causes:
•
Improper use of the device.
•
Improper start-up, operation, maintenance, servicing, repair or installation
of the device.
•
Failure to observe the safety information in this operating manual.
•
Operation of the device with defective or improperly installed
safety/protective equipment.
•
Failure to perform maintenance and inspection work according to
schedule.
•
Use of unapproved spare parts and accessories.
The proper installation and start-up of the device is a prerequisite for the making
of warranty claims.
3 Safety
3.1 Explanation of symbols
3.1.1 Symbols and notes used
The following symbols and signal words are used in this operating manual.
DANGER
Danger of death and/or serious damage to health
•
The sign, in combination with the signal word 'Danger', indicates
imminent danger; failure to observe the safety information will result in
death or severe (irreversible) injuries.
WARNING
Serious damage to health
•
The sign, in combination with the signal word 'Warning', indicates
imminent danger; failure to observe the safety information can result in
death or severe (irreversible) injuries.
CAUTION
Damage to health
•
The sign, in combination with the signal word 'Caution', indicates
danger; failure to observe the safety information can result in minor
(reversible) injuries.
ATTENTION
Damage to property
•
The sign, in combination with the signal word 'Attention', indicates a
situation where damage to the product itself or objects within its vicinity
can occur.
Reflex Hydroflow Mains Water Station — 20.12.2023

Note!
This symbol, in combination with the signal word 'Note', indicates useful
tips and recommendations for efficient handling of the product.
3.2 Personnel requirements
Installation and operation tasks are to be carried out by specialist personnel or
specially trained personnel only.
The electric connections and the wiring of the device must be executed by a
trained electrician in accordance with all applicable national and local
regulations.
3.3 Personal protective equipment
Use the prescribed personal protective equipment as required (e.g. ear
protection, eye protection, safety shoes, helmet, protective clothing, protective
gloves) when working on the system.
Information on personal protective equipment requirements is set out in the
relevant national regulations of the respective country of operation.
3.4 Intended use
The device is a mains water station. It is used to heat potable water for
immediate use. The devices may be used only in systems that are sealed
against corrosion and with the following water types:
•
Non-corrosive
•
Chemically non-aggressive
•
Non-toxic
The ingress of atmospheric oxygen by permeation into the entire heating and
cold water system, make-up water and similar must be reliably minimized during
operation.
3.5 Inadmissible operating conditions
The device is not suitable for the following applications:
•
Mobile system operation.
•
Outdoor operation.
•
For use with mineral oils.
•
For use with flammable media.
•
For use with distilled water.
•
For use with glycol.

Note!
It is not permitted to make any modifications to the hydraulics or the
circuitry.
Notes on the operating manual
English — 23