6.3.1
Positioning
Wall mounting
1.
Mark two holes in the wall for wall mounting. Refer to the drawing above
for the correct spacing. The diameter is 9 mm. Drill the holes and insert the
mounting elements in accordance with the wall's condition.
2.
Now insert a screw with washer and mounting element and turn the screw
until the screw head is 35 mm from the wall.
3.
Mount the station. Align the station horizontally and secure it with a second
screw and a washer.
4.
Tighten both screws evenly.
Hydroflow XS-M
Reflex Hydroflow Mains Water Station — 20.12.2023
Hydroflow L-XL
Installation
English — 35