Parkside PWSA 12 C2 Mode D'emploi page 28

Do not use if damaged .
Direction of rotation, clamping screw
Ø
Cutting disc diameter: 76 mm
76 mm
Safety information
Instructions for use
CORDLESS ANGLE GRINDER 12 V
˜ Introduction
Congratulations on the purchase of your new
CORDLESS ANGLE GRINDER, hereafter referred
to only as "the product" .
You have chosen a high-quality product . The user
manual forms an integral part of this product .
It contains important information on safety,
operation and disposal . Prior to operation of the
product, familiarise yourself with the product and
all operation and safety notes . For this purpose,
carefully read the following operation instructions
and safety notes .
Only use the product as described and for the
applications stated . Keep this manual in a safe
place . If you hand the product on to third parties,
all documentation must be passed on as well .
˜ Intended use
The product is suitable for cutting and grinding
metal, stone and wood materials, plastic, tiles and
non-ferrous metals without using water . There is a
special disc for each of the separate applications .
Please refer to the information from the disc
manufacturer .
The tool should not be used in any other
application (e .g .cutting/grinding with coolant
solutions, cutting/grinding harmful substances such
as asbestos) .
28 GB/IE
CAUTION! Do not touch moving parts .
Direction of rotation
Not for grinding
CE mark indicates conformity with
relevant EU directives applicable for this
product .
The device is intended to be used by do-it-
yourselfers . It was not designed for heavy
commercial use . The tool is to be used by adults .
Children over the age of 16 may not use the tool
except under supervision .
The manufacturer is not liable for damages caused
by an improper use or incorrect operation of this
product .
˜ Scope of delivery
m WARNING!
The product and the packaging are not
u
children's toys! Children must not play with
plastic bags, sheets and small parts! There is
a danger of choking and suffocation!
1 Cordless angle grinder
1 Cutting disc (only for non-ferrous metals,
preassembled)
1 Hex key (4 mm)
1 Storage case
1 User manual
INFO: Battery and charger are not included
in the scope of delivery .