MicroPower SX Serie Manuel D'utilisation page 9

Fuse protection
The charger has a fuse, see Fig. 3 Connections and components pos 3.
Model Fuse type
160LET BS88
SX17-32 24 V
High speed
100LET BS88
SX17-32 48 V
High speed
Alarms
If the battery charger's built-in self-testing function
detects a fault, this is indicated via the LEDs,
refer to LED indication. Note the information and
contact service personnel.
Checks
The following are recommended to be done
regularly:
1. Check the cables and connectors for damage.
2. Check that the battery is free from defects, in
good condition and is the correct type for the
battery charger.
3. Check that the BMS and battery are properly
connected and that the battery fuse, if any, is
not broken.
4. Check that the mains voltage is correct and
that there are no blown fuses.
Technical data
Operational ambient temperature: –5 to 40 °C (23
(1)
to 104 °F)
Storage temperature: –25 to 60 °C (–13 to
140 °F)
Mains voltage: See data label
Mains fuse: See data label
(3)
Battery types: Li-ion
Output voltage: See data label
Output current: See data label
Recommended battery capacity:
Min capacity (Ah) = Rated DC output current ×
1.25
Max capacity (Ah) = Rated DC output current × 5
Efficiency: > 90 % at full load
Ingress protection: IP21
Overvoltage category: II
Bolt size
M6
M6
Connectivity options:
Radio: 2.4 GHz (2402–2480 MHz)
Bluetooth: 2.4 GHz (2402–2480 MHz)
Approvals: CE and/or UL. See data label
1) Measured at the charger air inlet.
2) Located on the battery charger.
3) The charger can also charge other battery types when
the battery is equipped with a Battery Monitoring Unit
(BMU).
4) FCC: T7V1780 IC: 216Q-1780
The battery charger is recycled as metal and
electronics scrap. Local regulations apply and
must be followed.
Micropower Group AB
Idavägen 1, SE-352 46 Växjö, Sweden
Phone: +46 (0)470-727400
e-mail: support@micropower.se
www.micropower-group.com
Manufactured by: Micropower Group AB
(2)
The manufacturer declares that this product
(2)
complies with applicable requirements and the
Radio Equipment Directive 2014/53/EU.
Complete declaration is available at Micropower
(2)
Support Center: https://docs.micropower-
group.com/Other docs
(2)
Current rating Voltage rating
160 A 150 V
100 A 150 V
Recycling
Contact information
Approvals
ENGLISH
Rated tightening
torque
7.0 Nm ±10%
7.0 Nm ±10%
(4)
(4)
(2)
9