Troubleshooting / Decommissioning / Repair / Disposal
44
10
Troubleshooting
See operating instructions of the DULCOMETER
11
Decommissioning
Detach the electrical connection of the sensor from the
®
DULCOMETER
D1C.
12
Repair
The sensor must be returned to the factory for repair. For this
purpose, clean it and return to us in its original packaging with a
completed complaint form.
13
Disposal
IMPORTANT
Please observe the applicable national regulations.
You may return the decontaminated used equipment to ProMinent
Dosiertechnik GmbH, Heidelberg, against prepaid postage.
®
D1C controller.
ProMinent
®