Assembly - ProMinent DULCOTEST ICT 2 Mode D'emploi

Installation, electrical / Assembly
36
rd (12) bl (11)
Semi-conductor
screening
bn*
Overall screen**
7

Assembly

WARNING
• Ensure that the axes of the sensor and pipe are perpen-
dicular to one another (see Fig. 5). Ensure that the thread is
aligned correctly. It will otherwise affect the stability of the
measurement points in pressurised processes.
• The axis through the hole of the sensor tip must line up with
the pipe axis (see Fig. 5)
• The sensor tip must be covered by the water sample at all
times during measurement.
• The measurement results will otherwise be incorrect.
rd (10) bl (9)
gn (8)
wt rd
wt (7)
ye*
*
** In the case of potential
Cut off this cable
interference, earth the
overall screen via mains
cable
ProMinent ®