WALTHER PILOT PILOT Trend V1060103 3 Serie Mode D'emploi page 33

10 Waste Disposal
Waste spraying media and waste material from cleaning and servicing must be
disposed of in accordance with all applicable local and national regulations.
Warning
Observe the instructions issued by the manufacturers of the spraying and cleaning
material at all times. The improper disposal of waste material endangers the health
of human beings and animals!
11 Technical Data
PILOT Trend
Net weight
Grafity-Feed Cup
Material Connection
Air cap
max. operating
temperature
PILOT Trend-MP
Net weight
Grafity-Feed Cup
Material Connection
Air cap
max. operating
temperature
Air consumption:
Atomising air pressure
1,0 bar/ 15 psi
2,0 bar/ 29 psi
3,0 bar/ 44 psi
4,0 bar/ 58 psi
5,0 bar/ 73 psi
6,0 bar/ 87 psi
Type MP: The air concumption is 270 l/min. with an input air pressure of 3.3 bar/ 48 psi.
Right to effect technical changes reserved.
Pressure ranges:
438 g / 0,96 Ib max. input air pressure
542 g / 1,19 Ib
6-bore-air cap Nozzle sizes optional:
0,5 • 0,8 • 1,0 • 1,2 • 1,5 • 1,8 • 2,0 • 2,5 mm ø
Noise level
43°C / 109,4°F (measured at approx.
1 m from the spray gun)
Pressure ranges:
438 g / 0,96 Ib max. input air pressure
542 g / 1,19 Ib max. spraying pressure
Nozzle sizes optional:
8-bore-air cap
0,5 • 0,8 • 1,0 • 1,2 • 1,5 • 1,8 • 2,0 • 2,5 mm ø
Noise level
43°C / 109,4°F (measured at approx.
1 m from the spray gun)
Round jet
in l/min.
33
75
120
165
215
265
310
8 bar / 116 psi
83 dB (A)
3,3 bar / 47,8 psi
1,4 bar / 20,3 psi
83 dB (A)
Wide jet
in l/min.
105
170
240
310
380
450