Publicité
Les langues disponibles
Les langues disponibles
paper.
2.
If necessary, adjust the settings of the spray gun.
Pay attention to the following safety warnings when using the spray gun!
•
Always wear proper respiratory protection masks and protective overalls when
using the spray gun. Airborne particles can damage your health!
•
Always wear suitable hearing protectors in the vicinity of the spray gun. The
spray guns produce sound levels of approximately 83 dB(A).
•
Ensure that the working area is absolutely free from open fires and naked lights
and that smoking is strictly prohibited. The spraying of flammable liquids (e.g.
paint) is accompanied by the risk of fire and explosion.
•
When spraying materials, keep hands and other parts of the body away from the
nozzle of the gun when it is under pressure. Risk of injury!
•
Relieve the spray gun of all pressures when work is complete. Lines left in a
pressurised condition might burst and their contents may injure persons standing
nearby!
6
Spray pattern adjustments
The spray pattern of the PILOT Trend can be changed by adjusting the gun as
follows:
Adjust the material pressure:
Material connection:
You can adjust the material pressure only on the pump or the pressure tank. Please
follow the directions and safety instructions of the manufacturer.
Round / Wide Jet adjustment
The adjusting screw is used to adjust the width of the
spray jet. The jet can be changed to a wide jet by
turning the screw anti-clockwise (screwing out) and
to a round jet by turning the screw clockwise
(screwing in).
Setting the Material Flow Rate
The material flow rate can be adjusted by screwing
the adjusting screw in or out. The flow rate is
increased by turning the screw anti-clockwise
(screwing out) and decreased by turning the screw
clockwise (screwing in).
Atomizing Air Flow Adjustments
The atomizing air input is regulated across the air
volume regulating control by adjusting knob it
inwards or outwards. The atomizing air pressure is to
be set up at the air pressure reducing valve of the
compressor system - make sure to follow relevant
instructions and SAFETY warnings!
29
Publicité
