TOHATSU EverRun MX 25H Manuel De L'utilisateur page 22

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

5
Place the shift lever in the Neutral posi-
tion.
Be sure that the shift is in Neutral when
starting the engine.
This model is provided with start in gear
protection.
Neutral (N)
Shift lever
CAUTION
If the engine starts in gear, do not use it.
Contact an authorized dealer.
Note
Start-in-gear protection prevents engine
from starting at other than neutral shift. In-
gear starting of engine will move the boat
immediately, potentially leading to falling
down or causing passenger(s) to be thrown
overboard.
6
Turn the throttle grip until the mark on
the grip faces the triangular mark on the
steering handle.
7
Pull out the choke knob all the way. (No
choke operation is necessary when the
engine is warm.)
Starting Guideline
Temperature
Over 25ºC
(77ºF)
15ºC to 25ºC
(59ºF to 77ºF)
Below 15ºC
(59ºF)
8
Pull the starter handle slowly until you
feel resistance. Then pull it quickly.
Throttle grip
ENGINE OPERATION
Choke knob
Throttle grip
Starting procedure
Turn the throttle grip to original
position, pull the choke knob and
recoil starter once. Turn the
throttle grip to "START" position,
push the choke knob back, then
pull the recoil starter until the
engine starts.
Turn the throttle grip to "START"
position, and pull the choke knob
and recoil starter once. Push the
choke knob back, and pull the
recoil starter until the engine
starts.
Turn the throttle grip to "START"
position, pull the choke knob and
the recoil starter until combustion
occurs. Then push the choke
knob back, and pull the recoil
starter until the engine starts.
Slowly
Quickly
21
5

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Everrun mx 30hEverrun mx 15e2Everrun mx 18e2

Table des Matières