SilverCrest SSJK 300 A1 Mode D'emploi page 34

Insert the screen assembly 6
6. Place the screen assembly 6 into the
working container 8 so that the
arrow points to the closed lock
symbol .
Check: the screen assembly sits in its
position and can only be moved slight-
ly back and forth.
32 GB
Insert the auger 5
6
7. Slide the auger 5 into the screen as-
sembly 6 while turning it clockwise
and at the same time push it down
8
slightly. Finally press the auger 5 down
completely.
NOTE: if the auger 5 is not inserted deep
enough, the lid 4 will not close properly.
Mount the lid 4
8. Place the lid 4 on the working contain-
er 8 so that the point symbol
to the opened lock symbol
5
6
4
8
•
points
.