Horizon Hobby E-FLITE Slow Ultra Stick 1.2m Manuel D'utilisation page 8

EN
Wing Installation
1. Align and place the wing retainer (B) on top of the wing.
2. Align the wing with the three pins on the front wing mount, then slide the wing
forward into place.
3. Secure the wing to mounts with two included M3 x 22mm thumb screws (C)
4. Connect the aileron servo connector to the servo extension from the receiver.
5. Connect the aileron pushrods to the control horns in the indicated locations
Disassemble in reverse order.
8
B
Aileron Servo Arm
Retaining Tube
Pushrod
Slow Ultra Stick 1.2m
C
(2) M3 x 22mm
Thumb Screw
Aileron Control Horn
Clevis