Control Direction Test
Switch on the transmitter and connect the battery. Use the transmitter to operate
the aileron, elevator and rudder controls. View the aircraft from the rear when
checking the control directions.
This model has a built in aileron to rudder mix, when the ailerons are de ected the
rudder will move.
Elevator
1. Pull the elevator stick back. The elevators should move up, which will cause
the aircraft to pitch up.
2. Push the elevator stick forward. The elevators should move down, which will
cause the aircraft to pitch down.
Ailerons
1. Move the aileron stick to the right. The right aileron should move up and the
left aileron down, which will cause the aircraft to bank right.
2. Move the aileron stick to the left. The left aileron should move up and the right
aileron down, which will cause the aircraft to bank left.
Rudder
1. Move the rudder stick to the right. The rudder should move to the right, which
will cause the aircraft to yaw right.
2. Move the rudder stick to the left. The rudder should move to the left, which will
cause the aircraft to yaw left.
Transmitter Command
Control SurfaceResponse
EN
13