Horizon Hobby E-FLITE Slow Ultra Stick 1.2m Manuel D'utilisation page 5

Vertical Stabilizer Installation
1. Slide the vertical stabilizer (A) on the rear fuselage tube until the holes align.
2. There are two pushrods in the parts bag for the rudder and elevator. Choose
longer one and use it for the rudder.
3. Connect the 193mm rudder pushrod z-bend to the outermost hole in the servo
arm.
4. Attach the clevis to the third outermost hole of the rudder control horn (see
instructions for clevis connection).
B
A
Rudder Control Horn
Rudder Servo Arm
Retaining Tube
Clevis Pushrod
EN
5