EN
Battery Installation and ESC Arming
Battery Selection
We recommend the 3S 1300mAh 30C Smart Li-Po Battery. Refer to the Optional
Parts List for other recommended batteries. If using a battery other than those
listed, the battery should be within the range of capacity, dimensions and weight of
the Spektrum Li-Po battery packs to t in the fuselage.
1. Lower the throttle and throttle trim to the lowest settings. Power on the
transmitter, then wait 5 seconds.
2. Install a fully charged battery (A) in the battery tray as shown and secure it
using the hook and loop straps (B).
3. Connect the battery to the ESC.
4. Keep the aircraft immobile and away from wind or the system will
not initialize.
• The ESC will sound a series of tones (refer to step 6 of the binding
instructions for more information).
• An LED will light on the receiver.
CAUTION: Always keep hands away from the propeller. When armed,
the motor will turn the propeller in response to any throttle movement.
10
A
B
Slow Ultra Stick 1.2m