Publicité
Les langues disponibles
Les langues disponibles
EN
3
COMMISSIONING
once the mechanical installation, hydraulic connec-
tion, electrical connection and all masonry works
have been completed, the protective film on the fan
coil must be removed.
4
USE
This manual contains information for the installation,
use and maintenance of fan coils FrAE.
For the use of the controls, refer to the dedicated
manuals:
• CB-E manual for the use of the versions with CB-E
control
• CB-Touch manual for the use of the versions with
CB-Touch control
• Manual for T-AUTo control and T-MB control
5
MAINTENANCE
Routine maintenance
Before carrying out any maintenance work,
disconnect the electrical and hydraulic power
supply.
Air filter
The air filter must be cleaned periodically using a
vacuum cleaner or by lightly tapping it.
When it can no longer be cleaned, replace.
Always replace the filter after cleaning.
42
Filter removal
Keep pushing A to detach the filter
A
A
A
1
2
Remove the filter
3
locali.Indice di revisione
Filter repositioning
reposition the filter by following the three steps
below
2-3
1
1
Place the back of the filter in the unit
housing
1
locali.Indice di revisione
Fold the filter so that it is positioned as
shown
2
Insert the filter into the appropriate hous-
ing on the front of the unit
3
EN
43
Publicité
