Trane UNT-SV044A Serie Guide Technique page 15

EN
The vehicle unloading operations are the responsi-
bility of the recipient.
The FrAE units must be stored in a dry place protect-
ed from the weather.
2 INSTALLATION
Mechanical installation
Install the unit in a position that does not compro-
mise the air intake (see p. 28).
Air flow
2.1 Version with casing
2.2 Version without casing
28
Clearances
2.3
Wall drilling position
Drill the holes required for installation according to
the dimensions in the drawing.
Position the 4 dowels (recommended M8 screws) for
fixing the fan coil.
Fix the fan coil unit as shown at p. 31.
The unit can be installed using any other method
considered appropriate by the installer, providing it
is in accordance with current legislation.
left version drawings; for the right versions the
drawings have to be considered as mirrored.
locali.Indice di revisione locali.Indice di revisione
MIN 100 MIN 100
EN
29