Britax Poplar Guide D'utilisation page 16

Reattaching the harness pads
Loosen the harness.
1.
a. Lift harness release
button.
b. Pull both harness
straps forward.
2. Slide down the harness
pad from the outside
of the head restraint.
Repeat on the other
side.
3. Pull forward the cover
and route the harness
pad to the front of the
head restraint cover.
Repeat on the other
side.
4. Tuck the harness strap
under the internal
harness pad flap
and then fasten the
harness pad around
the harness strap.
Repeat on the other
side.
Note: Make sure the
rubber surface is
facing against the child
and the strap is not
twisted.
14
1
2
3
4