Publicité
Les langues disponibles
Les langues disponibles
[DTL MODE] Specifies the details.
The band and level of the edge correction are specified.
"SCENE FILE" screen
** SCENE FILE 1 ** P1
LABEL: ................
DTL MODE
RED DTL
GAMMA
KNEE
BLACK STRETCH
D-RANGE
WHITE CLIP
RET END
Step 1
Move the cursor to "DTL MODE" of the
"SCENE FILE" screen and press the [SEL] but-
ton.
The "DTL MODE" screen appears.
→
Step 2
Move the cursor to "PATTERN", select a pat-
tern from among "1", "2" and "3" and press
the [SEL] button.
The setting contents of "DTL BAND" and
→
"DTL LEVEL" are applied to "USER".
The band and level can be manually adjusted
in "USER". Perform adjustment on an as
needed basis. Be sure to view a monitor when
the adjustment is performed.
Note:
•
The band and level can also be adjusted
directly without applying any of the pat-
terns, "1", "2" and "3" to "USER".
Step 3
Move the cursor to "DTL BAND" and use the
[e] or [f] button to select the band of the
edge enhancement.
When the level indicator moves in the "+"
direction, the edge becomes thinner (the band
becomes higher). When the level indicator
moves in the "–" direction, the edge becomes
thicker (the band becomes lower).
*MANU
OFF
....
.... 45
|
*MANU
OFF
NORMAL
........
109
|
"DTL MODE" screen
** DTL MODE **
PATTERN
DTL BAND
DTL LEVEL
RET END
Step 4
Move the cursor to "DTL LEVEL" and use the
[e] or [f] button to select the level of the
edge enhancement.
When the level indicator moves in the "+"
direction, the image becomes sharper, and
when the level indicator moves in the "–" direc-
tion, the image becomes softer.
Note:
•
Jaggies may appear on the edge of a
photographic subject, but this phenome-
non is not abnormal. If this phenomenon
is not favorable, decrease "DTL BAND" or
"DTL LEVEL" to adjust the image quality.
USER
. . . .
4
|
+
−
....
.... 16
|
+
−
27
Publicité
