Publicité
Les langues disponibles
Les langues disponibles
Precautions
Refer installation work to the dealer.
Installation work requires technique and expe-
riences. Failure to observe this may cause fire,
electric shock, injury, or damage to the prod-
uct.
Be sure to consult the dealer.
Stop the operation immediately when
something is wrong with this product.
When smoke goes up from the product or the
smell of smoke comes from the product, con-
tinued use will result in fire, injury, or damage
to the product.
Turn the power off immediately and contact
qualified service personnel for service.
Do not attempt to disassemble or modify
this product.
Failure to observe this may cause fire or elec-
tric shock.
Consult the dealer for the repair or inspec-
tions.
Do not insert any foreign objects.
This could permanently damage this product.
Unplug the power plug immediately and con-
tact qualified service personnel for service.
Do not use the product in an atmosphere
of flammable gases.
Failure to observe this may cause an explosion
resulting in injury.
Avoid installing this product in the loca-
tions where salt damage occurs or corro-
sive gas is produced.
Otherwise, the mounting portions will deterio-
rate and accidents such as a fall of this prod-
uct may occur.
Tighten screws and mounting fixtures to
the specified torque.
Failure to observe this may cause a drop
resulting in injury or accidents.
Select an installation area that can sup-
port the total weight.
Selecting an inappropriate installation surface
may cause the product to fall down or topple
over, resulting in injury.
Reinforce the mounting point to the appropri-
ate level before mounting.
Periodic inspections shall be conducted.
Rust on the metal parts or screws may cause
a fall of the product resulting in injury or acci-
dents.
Consult the dealer for the inspections.
Do not pull the cables.
Failure to observe this may cause injury.
Do not damage the cables.
Putting a heavy thing or pinching may damage
the cables and cause injury.
[Precautions for use]
To keep on using with stable performance
Parts of this product may deteriorate and it
may shorten the lifetime of this product when
using in locations subject to high temperatures
and high humidity. Use this product at temper-
atures between 0 °C to 40 °C. Failure to
observe this may adversely affect the compo-
nents inside or cause this product to malfunc-
tion. Use of this product at temperatures of
30 °C or lower is recommended without direct
heat from heaters in consideration of heat
release at the camera location.
Handle this product with care.
Do not drop this product, nor apply shock or
vibration to the product. The product could be
damaged by improper handling or storage.
7
Publicité
