Panasonic GP-KH232CSE Mode D'emploi page 8

Do not aim this product at strong light
sources.
A light source such as a spot light on a part of
the MOS sensor causes a blooming (light
bleeding).
Blooming
Cleaning this product body
Turn the power off when cleaning this product.
Failure to observe this may cause injury or
trouble.
Do not use strong abrasive detergent when
cleaning this product. Otherwise, it may cause
discoloration. When using a chemical cloth for
cleaning, read the caution provided with the
chemical cloth product.
Indication label
Refer to the indication label placed on the sur-
face of the product as to the indications of
equipment classification and power source,
etc.
This product is designed for normal uses
as a general electronic equipment. Using
the product for special purposes (such as
traffic, transportation and medical treat-
ment) without taking the necessary proce-
dures according to the regulations relating
to one's country or field on one's own
responsibility may be prohibited.
8
Blight subject