Panasonic GP-KH232CSE Mode D'emploi page 10

Camera control unit (CCU)
<Front>
t Scene file selection button
[SCENE]
r Power switch
[DC POWER]
DC POWER
ON
OFF
i Gain selection button [GAIN]
r Power switch [DC POWER]
This switch toggles the power of the CCU
and camera head on and off. The switch
lights green while the power is turned on.
t Scene file selection button [SCENE]
The button selects a scene file from 1 to
3. Each scene file should be set up
beforehand using the SETUP menu.
(☞ Page 26)
y Freeze/menu button
[FREEZE MENU ]
Pressing this button: Displays the current
image as a still image when "FREEZE" in
the SETUP menu is set to "ON".
Note:
• Pressing a button other than the [
ton provides freeze cancellation.
• When the electronic zoom function or ver-
tical/horizontal flip function is assigned to
the [e]/[f] button, the image can be
scaled up/down or flipped in the image
freezing state. Refer to page 38 for func-
tion assignment to buttons.
Pressing for 2 seconds or more: Displays
the SETUP menu.
10
FREEZE
SCENE
MENU
GAIN
!0 Left button [e]
g] but-
y Freeze/menu button [FREEZE (MENU)]
u Selection button [SEL]
o AWC/Up button [AWC [g]]
AWC
GP-KH232
SEL
D RANGE
CAMERA
!2 Dynamic range/Down button
[D RANGE [h]]
!1 Right button [f]
u Selection button [SEL]
Pressing this button while the SETUP
menu is displayed determines the setting.
Pressing this button except while the
SETUP menu is displayed calls up the
SEL menu. (☞ Page 37)
i Gain selection button [GAIN]
Selects the gain from OFF, LOW and
HIGH. Selectable gain varies depending
on the setting in the SETUP menu
(☞ page 24).
When "AUTO" is selected for "GAIN" and
"OFF" is selected for "SENS UP": Fixed to
"HIGH"
o AWC/Up button [AWC [g]]
Pressing this button: This button moves
the cursor upward to change a setting
item while the SETUP menu is displayed.
When
ENABLE" in the SETUP menu is set to
"ON" (☞ page 36), the image can be
flipped vertically or horizontally.
Pressing for 2 seconds or more: Starts up
AWC while an image is displayed if
"WHITE BAL" in the SETUP menu is set to
"AWC" (☞ page 33).
!3 Camera cable connector
"FLIP ENABLE" or "MIRROR