Setup through the SETUP Menu
Performing each setting item in the SETUP menu should be completed in advance to use this unit.
Perform the settings for each item in accordance with the conditions of the camera shooting area.
Note:
•
In addition to the SETUP menu, this system has a simplified menu (SEL menu) that is displayed
using the [SEL] button on the front face of the CCU. Refer to page 37 for further information
about the SEL menu.
About the setup menus
The following items can be set with use of the SETUP menu:
Setup item
q CAMERA ID
w ELC
e SHUTTER
r GAIN
t SENS UP
y OUTPUT SEL
u HDMI OUTPUT
i SD ASPECT
o SCENE FILE
DTL MODE
RED DTL
GAMMA
KNEE
BLACK STRETCH Toggles the black stretch function on and off.
D RANGE
WHITE CLIP
FLARE COMP
DNR
MATRIX
CHROMA GAIN
TOTAL PED
18
Description
This item specifies the camera title. Through this item, a cam-
era title is created with alphanumerics and symbols and dis-
played on the screen.
Specifies the ELC function.
Specifies the electronic shutter speed.
Specifies the gain.
Specifies electronic sensitivity enhancement.
The output signals of the RGB/YPbPr output connector are
specified.
The output signals of the HDMI output connector are speci-
fied.
Specifies the display format for the SD format.
Registers the settings of details, gamma, hue, etc.
Specifies the details.
Adjusts the enhancement of red edge.
Corrects the gamma.
Adjusts the knee point.
Toggles the dynamic range between NORMAL and EXPAND.
Adjusts the white clip level.
Toggles the flare compensation on and off.
Selects the level of the digital noise reduction function.
Adjusts the hue and chroma.
Adjusts chroma gain.
Adjusts the pedestal level.
Page
21
22
24
24
25
25
25
26
26
27
28
28
28
29
29
29
29
29
30
31
31