Publicité
Les langues disponibles
Les langues disponibles
ZONE 2
Remote controlling Zone 2
The supplied remote control can be used to control Zone
2. You can even select the input source and control
components located in the main room directly from the
second room regardless of the listening condition in the
main room.
y
You can also turn on/off the main or Zone 2 mode by pressing
MAIN
ZONE 2
or
on the front panel.
To enable Zone 2 mode on the remote
control
1
Press
.
2
Press CODE SET using a ballpoint pen or
similar object.
The TRANSMIT indicator on the remote control
flashes twice.
CODE SET
3
Enter the code number "2999".
Immediately after you have configured the remote
control for Zone 2, the remote will enter main mode.
When the remote is in main mode, you can turn the
main unit on, or set it in standby mode independently
of Zone 2 by pressing SYSTEM POWER or
STANDBY.
Notes
• If you enable Zone 2, the Zone function is applied to the current
remote control ID (ID1: default code, ID2: alternative code).
However, because the remote control codes for Zone 2 are
common to ID1 and ID2, the remote control ID does not change
even if it is switched.
• To release ZONE 2, clear the remote control code set for
or set a remote control code other than a
62
TRANSMIT
,
TV
code for
.
To control Zone 2
1
Press
to set the remote control to Zone 2.
The TRANSMIT indicator on the remote control
lights up while the remote control is in Zone 2 mode.
2
Press SYSTEM POWER to turn Zone 2 power
on.
3
Press an input selector button to select the
input source you want to listen to in the
second room.
CD
MD/CD-R
DVD
DTV/CBL
VCR
4
You can control Zone 2 using the input
selector buttons, STANDBY, SYSTEM
POWER and MUTE.
CODE SET
POWER
POWER
TV
CD
MD/CD-R
DVD
DTV/CBL
VCR
TV VOL
TV MUTE
TV INPUT
y
Zone 2 volume cannot be adjusted with the remote control. Use
the control on the amplifier in the second room.
Note
The remote control returns to the main mode 10 seconds after you
press
, or if you press any button other than SYSTEM
POWER, STANDBY, MUTE or the input selector buttons. If the
TRANSMIT indicator is turned off, press
control to Zone 2 mode before turning Zone 2 power on or off,
changing the input source, or muting the sound.
TUNER
SLEEP
V-AUX
MULTI CH IN
AMP
TRANSMIT
SYSTEM
STANDBY
POWER
AV
TUNER
SLEEP
V-AUX
MULTI CH IN
AMP
TV CH
VOLUME
MUTE
to set the remote
Publicité
