Publicité
Les langues disponibles
Les langues disponibles
Replacing the oven light
All manuals and user guides at all-guides.com
If the oven light bulb fails, it must be replaced.
Replacement heat-resistant bulbs can be obtained
from the after-sales service or from specialist
retailers. Please specify the E number and
FD number of your appliance. Do not use any other
type of bulb.
Proceed as follows:
1.
Switch off the relevant circuit breaker in the fuse
box.
2.
Open the oven door.
3.
Place a tea towel in the cold oven to prevent
damage.
4.
Remove the glass cover from the bulb inside the
cooking compartment by turning it anti-clockwise.
5.
Replace the bulb with one of the same type.
Voltage: 230 V / 50 Hz
Power: 15 W
Screw thread: E14
Heat resistance: 300°C
6.
Screw on the glass cover again.
7.
Remove the tea towel and switch the circuit
breaker back on.
39
Publicité
