Publicité
Les langues disponibles
Les langues disponibles
2) Move the starter lever (1) to (B) (fig. 21.2).
3) Check that the stop switch (3, fig. 21.3) is positioned
to
(RUN), then press the ignition button (4).
Let the engine start without using the throttle control.
Important
Never operate the electric start button more than 5
seconds at a time. If needed, allow 10 seconds before
attempting to restart the engine.
4) Move the starter lever (1) to its vertical position (A) (fig.
21.2).
Important
Do not rev up the engine when it is cold. Allow
some time for oil to warm up and reach all points that
need lubricating.
High ambient temperature (over 35°C):
Follow the same procedure, however, do not use the
button (1).
Cold ambient temperature (below 10°C):
Follow the procedure for "Regular ambient
temperature", however allow 5 minutes for the engine to
warm up.
3
4
E
fig. 21.2
fig. 21.3
31
Publicité
