Publicité
Les langues disponibles
Les langues disponibles
MAIN MAINTENANCE OPERATIONS
Removing the fairing
Some servicing operations need the motorcycle fairing to
E
be removed.
Warning
Firmly secure all removed parts when refitting
them, otherwise some of them might suddenly come off
when riding and you may loose control of your
motorcycle.
Important
At reassembly always fit nylon washers when
tightening fastening screws, not to damage painted parts
and Plexiglas headlamp fairing. Some fastening screws
are of the self-tapping type; do not overtighten,
otherwise treading might damage thus avoiding further
use.
36
Side body panels (fig. 25)
To remove the body panels proceed as follows:
unscrew the three fasteners (1) placed under the fairing
RH and LH side;
unscrew the four headlamp fairing fasteners (2);
unscrew the four frame fasteners (3).
fig. 25
Publicité
