Operating The Hood; Control Board - AVG FLORIDA-AVF-306PS Instructions D'installation Et Guide De L'usager

5. Install the exhaust duct on the outlet and direct it outside.

OPERATING THE HOOD

CONTROL BOARD

POWER : once the hood I connected to the main supply, the backlight will be turned on, output will
be closed and the unit will enter into a "stand-by" mode.
1. Power button
When you Press the Power button
work at the low speed; press power button again and the backlight, lights and the hood will be
turned off and return into standby mode.
2. Lamp button
Press the lamp button
lights will be turned off. You can also press the lamps button to close the lights only, this will keep
the backlight on and the fan working at low speed
PIC 6
the backlight and lights will turn on and the hood will
the backlight and the lights will turn on. Press one more time and the
22
See PIC 6.
.