TROUBLESHOOTING
Fault
Light on, but motor does
not work
Light does not work,
motor does not work
Oil leakage
Lights not working
Insufficient suction
The Range hood is
leaning
NOTE:
Any electrical repair performed on this unit must comply with local, provincial and federal laws. Please contact
customer service before undertaking any action. Always unplug the hood from the power source when servicing
or maintaining.
Possible Cause
Fan switch turned off
Fan switch failed
Motor failed
House fuses blown
Power cord loose or disconnected
No return valve and the outlet are
not tightly sealed
Leakage from the connection of
chimney and cover
Broken/Faulty LED lamps
The distance between the range
hood and the cooking surface is too
high
The fixing screw not tight enough
Solution
Select a fan switch position.
Contact service center
Contact service center
Reset/Replace fuses
Check connection to power outlet.
Switch power outlet on.
Take down the no return valve and seal
with sealant.
Take chimney down and seal.
Replace LED lamps as per
instructions.
Reinstall the range hood at the correct
distance.
Tighten the hanging screw and level
the hood correctly.
28