Installation Procedures - AVG FLORIDA-AVF-306PS Instructions D'installation Et Guide De L'usager

INSTALLATION PROCEDURES

1.The hood should be positioned at a distance of 71 to 76.2 cm (28-30'') from the cooking surface to
be effective.
Drill a hole 28 ¼'' X 10 ¾'' (730 X 275mm). SEE PIC 1. in the cabinet, make sure the edge of the
2.
hole is 1.4'' wide (35mm) so that the hood is sufficiently supported.
Open the panel and remove the aluminum filters (PIC 2)
3.
4. insert the hood into the cabinet (PIC 3), PUSH the clip on the exterior side of the hood (PIC 4) and
tighten up the screws clockwise with a screwdriver (PIC 5). Make sure the hood is correctly tight in
position.
28 1/4"
PIC 2
PIC 4
PIC 1
21
PIC 3
PIC 5