INSTALLING GREASE MICRO-MESH FILTERS
To install filters for the following four steps:
Angle the filter into slots at the back of the hood.
1-
2- Push the button on handle of the filter.
3- Release the handle once the filter is into a resting position.
4- Repeat to install all filters.
LED BULB REPLACEMENT
WARNING:
NOTE:
Before changing the LED lamps, make sure that the appliance is unplugged.
Protect your hands by wearing gloves to avoid any injuries.
Replacing the LED lamps:
1. Switch the unit off and pull out the plug
2. Flip open the inner glass and take out the aluminum filters
3. Loosen the screws and take down the hood body from the cavity.
24