Ec-Declaration Of Incorporation - Trox Technik X-CUBE-Ex Guide D'utilisation

BA-CFD-RLM-ATEX 3.9 – 04/2016

EC-Declaration of Incorporation

The manufacturer:
Product designation:
Type nomination:
Serial n°:
Year of manufacture:
The following harmonised
standards have been
1)
applied:
Nicotra Gebhardt GmbH,
Gebhardtstrasse 19-25, 74638 Waldenburg, Germany
herewith declares, that the following product:
Plug fan
RLM 55-....-2G; RLM 56-....-2G;
.... . ..-.
RLM E6- - Y- ; RLM E3-
see type plate
see type plate
qualifies as a partly completed machine, according to Article 2, clause "g"
and complies with the following basic requirements of the Machine Directive
(2006/42/EC): Annex I, Article 1.1.2; 1.3.7.
The partly completed machine may be put into operation only if it has been
stated that the machine into which the uncompleted machine has to be
incorporated complies with the requirements of the Machine Directive
(2006/42/EC).
DIN EN ISO 12100 Safety of machines – General design principles
DIN EN ISO 13857 Safety of machines – Safety distances to hazardous
areas
The manufacturer is committed to providing the special documents for partly
completed machines to any state authority on request.
Waldenburg, 15.12.2015
Representative for the documentation: Michael Hampel
i.V. I. Stöbe
Head of production
1)
The complete listing of applied standards and technical specifications see manufacturer's documentation.
.... . ..-. ....
- Y- ; RLM G6-
i.V. Dr. J. Anschütz
Research and Development Director
English
. ..-.
- Y-
EN-23/24