Product Description - Trox Technik X-CUBE-Ex Guide D'utilisation

BA-CFD-RLM-ATEX 3.9 – 04/2016
5.
Figure 5-1:
Ranges
EN-10/24

Product Description

5.1. Centrifugal fan RLM without housing, direct driven (Plug
Fan)
Plug fans RLM are optimized for operation without scroll. Direct drive with
IEC motor. The centrifugal impeller with backward-curved blades is fitted
directly to the motor shaft. The fan unit consisting of impeller with inlet cone,
motor block and base frame, installed and adjusted at the factory. The fans
are equipped with a volumeter as a standard.
Plug fans RLM are comply to the requirements of ATEX-Directive
2014/34/EU by designed safety and safe construction according to
EN 13463-1 and -5; EN 14986. The classification of these fans is fitting into
group II, category 2G, Explosion group IIB(+H2), Temperature class T4.
Materials:
 Impeller made of sheet steel, ATEX special coated.
 Inlet cone made of copper.
Note The ATEX fan must not be modified by the user. Any modification will
render ATEX conformity invalid.
5.2. Centrifugal fan (Plug fan) RLM
5.2.1 Centrifugal fan direct driven RLM
RLM 55-1112/-1214
2 1
1. Fan
2. Inlet guard
- Safety of machinery DIN EN ISO 13857
- Degrees of protection DIN EN 60529
RLM 56-2528/-1011 / RLM E3 –2528/-6371
RLM G6-2225 / RLM E6-2528/-1011
2 1
English