Safety Instructions; Safety Devices - Trox Technik X-CUBE-Ex Guide D'utilisation

BA-CFD-RLM-ATEX 3.9 – 04/2016
DANGER!
DANGER!
DANGER!
CAUTION!
intended, having due regard for safety, an awareness of hazards and in
due compliance with the operating instructions.
 Arrange immediate repair of any faults which could compromise safety.
Potentially explosive gas mixtures in conjunction with hot and moving
parts may cause serious or fatal injury.
Risk of explosion due to increased ambient temperature!
1. Observe ambient temperature
2. Ensure adequate supply of cooling air

4.2. Safety Instructions

The fan may only be commissioned, operated and serviced in compliance
with the following instructions:
 Operating instructions
 Warning and information signs on the fan
 Any other operating and installation instructions pertaining to the
machine
 Terms and requirements relevant to the machine
 Applicable national and regional regulations, especially regarding
explosion protection, health & safety and accident prevention.

4.3. Safety Devices

1. Use appropriate safeguards to prevent contact with rotating parts (shafts,
impeller, etc.).
2. Protection devices are so selected so that sucking or falling-in of objects
will be prevented.
3. After installation (and before electrical connection) immediately refit any
guards which have been removed during installation.
The fans are delivered with inlet guards. If there is a danger of contact
with the impeller owing to the way the fan is installed, then it is
necessary to fit guards conforming to DIN EN ISO 13857.
Only then can the fan be set in operation!
ATEX fans of categories 2G or 3G are made for integration into
installations. Care must be taken to avoid any ingress of object into the
fan. (min. IP20 to EN 60529).
The user has to find corresponding protection in order to ensure a safe
operation!
The suitability of protection devices and their fixtures to the fan have to
be evaluated within the overall security concept of the installation.
4.4. Professional Staff
1. Ensure that the Installation of the fan and any work on it is carried out by
skilled professionals only with due regard to these operating instructions
and any applicable regulations.
2. Electrical connection to be carried out by qualified electricians only.
English
EN-7/24