Installation And Maintenance; Type Plate - Trox Technik X-CUBE-Ex Guide D'utilisation

BA-CFD-RLM-ATEX 3.9 – 04/2016
CAUTION
Fig 4-1:
Example type plate
Fig 4-2: Arrow indicating
direction of rotation
Fig 4-3: Example circuit
diagram
Use only genuine spare parts supplied by Nicotra Gebhardt GmbH.
In areas subject to explosion hazards the fan may only be modified or
converted by Nicotra Gebhardt GmbH itself, by a service location
approved by the company, or by personnel authorised and trained by
the company.

4.8. Installation and Maintenance

The following steps should be taken before working on the fan:
1. Ensure that the atmosphere is not potentially explosive.
2. Switch off the machine and take measures to prevent it from being
switched back on accidentally.
3. Display the following message on a sign:
Do not switch on! Work currently in progress on the machine.
4.9. Signs on the Fan
Depending on the model, the type plate and the arrow indicating the
direction of rotation are fitted to the fan for high visibility.

4.9.1. Type plate

4.9.2 Arrow Indicating Direction of Rotation
4.9.3 Terminal Board Circuit Diagram
The wiring diagram is in the terminal box of the motor.
Example!
Example!
English
EN-9/24