Protective Gear; Specific Hazards - Trox Technik X-CUBE-Ex Guide D'utilisation

BA-CFD-RLM-ATEX 3.9 – 04/2016
CAUTION!
EN-8/24

4.5. Protective Gear

Ensure that members of staff are wearing protective gear appropriate
to their deployment and environment.
The protective clothing is specified below!

4.6. Specific Hazards

4.6.1. Noise Emission
The sound emission expected during normal use of the fan is documented in
the technical lists and should be duly taken into account.
 Wear ear defenders when working near to or on the running fan!
4.6.2. Heavy Loads
The heavy weight of the fan and its components entail the following risks in
transit and during installation:
 Risk of being trapped, crushed or cut by moving or toppling machinery
 Danger of falling components
 Do not stand or work under suspended loads.
 Wear a hard hat, safety shoes and gloves.
4.6.3. Rotating Shafts and Impellers
Objects falling onto rotating shafts and impellers can fly off at an angle and
cause serious injury.
Articles of clothing and hair can get caught in rotating shafts and impellers.
 Do not remove guards during operation.
 Do not wear loose-fitting clothing when working near rotating
shafts and impellers.
 Wear goggles.
4.6.4. Hot Surfaces
There is a risk of sustaining burns or scalds on hot surfaces during
operation.
 Do not touch the motor during operation.
 When the fan has stopped wait until the motor has cooled down.
 Wear protective gloves.
4.7. Structural Modifications, Spare Parts
Note Unauthorised structural modifications may not be made to the fan
without the consent of Nicotra Gebhardt GmbH.
Nicotra Gebhardt GmbH shall not accept liability for any damage
arising as a result such modifications.
English