Publicité
Les langues disponibles
Les langues disponibles
The charging power depends on the mains supply,
the type of the domestic electricity connection and
any other large-scale loads being used. The full
charging power may not be available.
The charging current can only be reduced, but it can-
not exceed the value specified during installation.
Information
The settings for the charging current can be changed
via the web app.
b Logged into the web app as a service user
1. In the navigation, select Charge Management.
2. Select Charging settings.
3. In the Charging current view, set the value
under Maximum charging current.
Update software
Information
An internet connection is required to obtain informa-
tion about software updates and to install them on
the Wallbox. There is also the option to install a soft-
ware update locally on the Wallbox if necessary.
Automatic software updates
Information
Automatic software updates are the default setting
of the Wallbox.
b Vehicle cable not plugged in
b Device overview opened in My Porsche App
e
Tap on Equipment settings.
Automatic software updates can be toggled on and
off:
–
On: Checks for software updates, automatically
downloads and installs them.
–
Off: Checks for software updates, and displays a
message if any are available. The download must
be started manually.
Information
Manual software updates are started from the web
app.
Manual software updates
b Vehicle cable not plugged in
b Logged into the web app as a standard user.
1. Download the current software package for the
Wallbox from porsche.com > Advice & Buy >
E-Performance and save it locally.
2. In the web app, select Software Update in the
navigation.
3. Select Software Update and confirm installa-
tion.
Charge
Notes on charging
Depending on the location, the connection of charg-
ing equipment for electric vehicles is subject to reg-
istration.
e
Check for any reporting requirements and the
applicable legal requirements for operation be-
fore connecting.
NOTICE
Damage to the Wallbox
The Wallbox may be operated within a temperature
range between −13 °F and +113 °F only.
e
To avoid overheating during operation, the Wall-
box should be installed in a weather-protected
location and not exposed to direct sunlight for
long periods of time. If the wallbox overheats,
the charging process is stopped automatically
until the temperature returns to the normal
range.
e
If the Wallbox becomes too hot or too cold, allow
the Wallbox to slowly return to the operating
temperature range. Do not actively attempt to
cool or heat the Wallbox, e.g. using cold water or
a hairdryer.
NOTICE
Charging at high ambient temperatures or in direct
sunlight may cause the charging process to stop
prematurely. Such interruptions can be prevented by
limiting the charging power.
Charge | EN
39
Publicité
